Maintenance:

Track Maintenance:

1. Clean left and right tracks every month, or as necessary with compressed caned air, a vacuum, a hose or a brush to remove all the debris that have accumulated in the tracks. Wipe tracks clean with a soft cloth and a gentle detergent.

2. Let tracks dry and then apply an even coat of Clear View Motorized Power Screen Silicon Spray to the left and right vertical tracks. Remove the excess spray. Raise and lower the Clear View Motorized Power Screen to lubricate each rail and end cap entirely.

3. Do not scrub the extruded aluminum parts as this will damage the powder coated surface.

Screen Maintenance:

1. Always make sure that the screen is not riding outside of the track(s). This will cause the screen to bend, fray, and/or snag when rolling back into the housing. (This is not under the warranty) In very windy conditions keep the screen rolled up into the housing unit to prevent wind damage.

2. To clean the screen mesh, vacuum softly using an upholstery brush. Carefully vacuum the inside and outside of the screen mesh, taking caution not to snag the screen mesh itself. Then use a screen mesh cleaning wipe on both sides of the screen to fully remove all the dirt from the mesh.

3. Keep pets from clawing or scratching the screen.